Steering Wheel ASP Panels (Pair)

asp_panels (2).jpg
MazdaERDSCF0969-1.jpg
asp dim.JPG
asp_panels (2).jpg
MazdaERDSCF0969-1.jpg
asp dim.JPG

Steering Wheel ASP Panels (Pair)

225.00

The OBR Analogue Switch Panel (ASP) is an uncomplicated, lower cost approach to switching inputs into a Motorsport ECU or Power Control Module (PDM, PCM).

Each ASP is intended to be connected to an analogue input which has an internal pull-up voltage present.  When a switch is pressed, this will register a switch specific voltage change and signal to the ECU/PDM/PCM to respond accordingly.

These panels are sold as a pair, but can be sold separately if required.

Quantity:
Add To Cart

Depending on ECU/PDM configuration the signal in from a switch pressed on the ASP could be momentary or latching.

Each ASP has 2 x Raychem type55 flying 300mm leads. The rear of the panel is component free and flat and thus can be fitted straight forwardly using adhesive pads or glue.

Each 4 switch ASP is compact at 50mm x 55mm which allows easy fitment to most flat or shallow dished motorsport steering wheels.  The symmetrical design means mounting can be either side or even both sides if required.  

The ASP is ideal for activating the flash of headlights, wash of the screen or hoot of the horn.

The ASP overlay uses the same high quality and durable finish as the OBR CAN Membrane Switch Panels whilst retaining a direct positive feedback to a gloved hand. The UV florescent overlay option offers increased visibility during all driving conditions.

*Custom overlay options are available as well as custom ASP shapes and sizes.

Using an input which is pulled up to 5v as an example, the switches will provide their input voltages to ECU/PCM/PDM as below.

SW 1 – 3500mv

SW 2 – 2650mv

SW 3 – 1750mv

SW 4 – 850mv